Texas Instruments AFE79 Series Programming & User Manual page 1191

www.ti.com
2.16.580 Register 107Ch (offset = 107Ch) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_RXB_
0-0
PKDET_0
2.16.581 Register 107Dh (offset = 107Dh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPO_
1-1
RXB_PKDET_0
OVR_INTPO_RXB
0-0
_PKDET_0
2.16.582 Register 1080h (offset = 1080h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_RXB_
0-0
PKDET_1
SBAU337 – May 2020
Submit Documentation Feedback
Figure 2-2843. Register 107Ch
5 4
Table 2-2859. Register 107C Field Descriptions
Type Reset
R/W 0h
Figure 2-2844. Register 107Dh
5 4
Table 2-2860. Register 107D Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2845. Register 1080h
5 4
Table 2-2861. Register 1080 Field Descriptions
Type Reset
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
Description
polarity control for intpo_rxb_pkdet_0. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PO_RXB_PKD
Description
control to select whether the input function intpo_rxb_pkdet_0
needs to be overriden ot not. 1 indicates override.
override value for intpo_rxb_pkdet_0 when
ovr_sel_intpo_rxb_pkdet_0 is made high
3 2
Description
polarity control for intpo_rxb_pkdet_1. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
Serial Interface Register Maps
IO Wrap Register Map
1 0
POL_INTPO_R
XB_PKDET_0
R/W-0h
1 0
OVR_INTPO_R
XB_PKDET_0
ET_0
R/W-1h R/W-0h
1 0
POL_INTPO_R
XB_PKDET_1
R/W-0h
1191