Texas Instruments AFE79 Series Programming & User Manual page 1205

www.ti.com
2.16.622 Register 11B0h (offset = 11B0h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_FBAB
0-0
_PKDET_3
2.16.623 Register 11B1h (offset = 11B1h) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPO_
1-1
FBAB_PKDET_3
OVR_INTPO_FBA
0-0
B_PKDET_3
2.16.624 Register 11B4h (offset = 11B4h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_FBC
0-0
D_PKDET_0
SBAU337 – May 2020
Submit Documentation Feedback
Figure 2-2885. Register 11B0h
5 4
Table 2-2901. Register 11B0 Field Descriptions
Type Reset
R/W 0h
Figure 2-2886. Register 11B1h
5 4
Table 2-2902. Register 11B1 Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2887. Register 11B4h
5 4
Table 2-2903. Register 11B4 Field Descriptions
Type Reset
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
Description
polarity control for intpo_fbab_pkdet_3. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PO_FBAB_PK
Description
control to select whether the input function
intpo_fbab_pkdet_3 needs to be overriden ot not. 1 indicates
override.
override value for intpo_fbab_pkdet_3 when
ovr_sel_intpo_fbab_pkdet_3 is made high
3 2
Description
polarity control for intpo_fbcd_pkdet_0. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
Serial Interface Register Maps
IO Wrap Register Map
1 0
POL_INTPO_F
BAB_PKDET_3
R/W-0h
1 0
OVR_INTPO_F
BAB_PKDET_3
DET_3
R/W-1h R/W-0h
1 0
POL_INTPO_F
BCD_PKDET_0
R/W-0h
1205