Texas Instruments AFE79 Series Programming & User Manual page 1184

IO Wrap Register Map
2.16.559 Register A3Ch (offset = A3Ch) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_TX_N
2-1
COSEL_0
POL_INTPI_TX_N
0-0
COSEL_0
2.16.560 Register A3Dh (offset = A3Dh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1
TX_NCOSEL_0
OVR_INTPI_TX_N
0-0
COSEL_0
2.16.561 Register A40h (offset = A40h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_TX_N
2-1
COSEL_1
POL_INTPI_TX_N
0-0
COSEL_1
1184
Serial Interface Register Maps
Figure 2-2822. Register A3Ch
5 4
Table 2-2838. Register A3C Field Descriptions
Type Reset
R/W 0h
R/W 0h
Figure 2-2823. Register A3Dh
5 4
Table 2-2839. Register A3D Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2824. Register A40h
5 4
Table 2-2840. Register A40 Field Descriptions
Type Reset
R/W 0h
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
SEL_INTPI_TX_NCOSEL_0
R/W-0h
Description
select control for intpi_tx_ncosel_0. 0 indicates take from
parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
polarity control for intpi_tx_ncosel_0. 0 indicates pass through
from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PI_TX_NCOSE
Description
control to select whether the input function intpi_tx_ncosel_0
needs to be overriden ot not. 1 indicates override.
override value for ovr_sel_intpi_tx_ncosel_0 is made high
3 2
SEL_INTPI_TX_NCOSEL_1
R/W-0h
Description
select control for intpi_tx_ncosel_1. 0 indicates take from
parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
polarity control for intpi_tx_ncosel_1. 0 indicates pass through
from GPIO when selected 1 indicates inverted signal
Submit Documentation Feedback
www.ti.com
1 0
POL_INTPI_TX
_NCOSEL_0
R/W-0h
1 0
OVR_INTPI_TX
_NCOSEL_0
L_0
R/W-1h R/W-0h
1 0
POL_INTPI_TX
_NCOSEL_1
R/W-0h
SBAU337 – May 2020