Texas Instruments AFE79 Series Programming & User Manual page 1188

IO Wrap Register Map
2.16.571 Register 1009h (offset = 1009h) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPO_
1-1
SPIB2_SDO
OVR_INTPO_SPIB
0-0
2_SDO
2.16.572 Register 106Ch (offset = 106Ch) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_RXA_
0-0
PKDET_0
2.16.573 Register 106Dh (offset = 106Dh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPO_
1-1
RXA_PKDET_0
OVR_INTPO_RXA
0-0
_PKDET_0
1188
Serial Interface Register Maps
Figure 2-2834. Register 1009h
5 4
Table 2-2850. Register 1009 Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2835. Register 106Ch
5 4
Table 2-2851. Register 106C Field Descriptions
Type Reset
R/W 0h
Figure 2-2836. Register 106Dh
5 4
Table 2-2852. Register 106D Field Descriptions
Type Reset
R/W 1h
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
OVR_SEL_INT
PO_SPIB2_SD
Description
control to select whether the input function intpo_spib2_sdo
needs to be overriden ot not. 1 indicates override.
override value for intpo_spib2_sdo when
ovr_sel_intpo_spib2_sdo is made high
3 2
Description
polarity control for intpo_rxa_pkdet_0. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PO_RXA_PKD
Description
control to select whether the input function intpo_rxa_pkdet_0
needs to be overriden ot not. 1 indicates override.
override value for intpo_rxa_pkdet_0 when
ovr_sel_intpo_rxa_pkdet_0 is made high
Submit Documentation Feedback
www.ti.com
1 0
OVR_INTPO_S
PIB2_SDO
O
R/W-1h R/W-0h
1 0
POL_INTPO_R
XA_PKDET_0
R/W-0h
1 0
OVR_INTPO_R
XA_PKDET_0
ET_0
R/W-1h R/W-0h
SBAU337 – May 2020