Texas Instruments AFE79 Series Programming & User Manual page 1181

www.ti.com
2.16.550 Register A29h (offset = A29h) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1
FB_NCOSEL_3
OVR_INTPI_FB_N
0-0
COSEL_3
2.16.551 Register A2Ch (offset = A2Ch) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_RX_N
2-1
COSEL_0
POL_INTPI_RX_N
0-0
COSEL_0
2.16.552 Register A2Dh (offset = A2Dh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1
RX_NCOSEL_0
OVR_INTPI_RX_N
0-0
COSEL_0
SBAU337 – May 2020
Submit Documentation Feedback
Figure 2-2813. Register A29h
5 4
Table 2-2829. Register A29 Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2814. Register A2Ch
5 4
Table 2-2830. Register A2C Field Descriptions
Type Reset
R/W 0h
R/W 0h
Figure 2-2815. Register A2Dh
5 4
Table 2-2831. Register A2D Field Descriptions
Type Reset
R/W 1h
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
OVR_SEL_INT
PI_FB_NCOSE
Description
control to select whether the input function intpi_fb_ncosel_3
needs to be overriden ot not. 1 indicates override.
override value for ovr_sel_intpi_fb_ncosel_3 is made high
3 2
SEL_INTPI_RX_NCOSEL_0
R/W-0h
Description
select control for intpi_rx_ncosel_0. 0 indicates take from
parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
polarity control for intpi_rx_ncosel_0. 0 indicates pass through
from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PI_RX_NCOSE
Description
control to select whether the input function intpi_rx_ncosel_0
needs to be overriden ot not. 1 indicates override.
override value for ovr_sel_intpi_rx_ncosel_0 is made high
Serial Interface Register Maps
IO Wrap Register Map
1 0
OVR_INTPI_FB
_NCOSEL_3
L_3
R/W-1h R/W-0h
1 0
POL_INTPI_RX
_NCOSEL_0
R/W-0h
1 0
OVR_INTPI_R
X_NCOSEL_0
L_0
R/W-1h R/W-0h
1181