Texas Instruments AFE79 Series Programming & User Manual page 1169

www.ti.com
Bit Field
OVR_SEL_INTPI_
1-1 RXD_AGC_PIN_F
REEZE
OVR_INTPI_RXD_
0-0 AGC_PIN_FREEZ
E
2.16.515 Register 9CCh (offset = 9CCh) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_FBAB_
2-1 AGC_PIN_FREEZ
E
POL_INTPI_FBAB
0-0 _AGC_PIN_FREEZ
E
2.16.516 Register 9CDh (offset = 9CDh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1 FBAB_AGC_PIN_F
REEZE
OVR_INTPI_FBAB
0-0 _AGC_PIN_FREEZ
E
SBAU337 – May 2020
Submit Documentation Feedback
Table 2-2793. Register 961 Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2778. Register 9CCh
5 4
Table 2-2794. Register 9CC Field Descriptions
Type Reset
R/W 0h
R/W 0h
Figure 2-2779. Register 9CDh
5 4
Table 2-2795. Register 9CD Field Descriptions
Type Reset
R/W 1h
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
Description
control to select whether the input function
intpi_rxd_agc_pin_freeze needs to be overriden ot not. 1
indicates override.
override value for ovr_sel_intpi_rxd_agc_pin_freeze is made
high
3 2
SEL_INTPI_FBAB_AGC_PIN_F
REEZE
R/W-0h
Description
select control for intpi_fbab_agc_pin_freeze. 0 indicates take
from parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
polarity control for intpi_fbab_agc_pin_freeze. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PI_FBAB_AGC
_PIN_FREEZE
Description
control to select whether the input function
intpi_fbab_agc_pin_freeze needs to be overriden ot not. 1
indicates override.
override value for ovr_sel_intpi_fbab_agc_pin_freeze is made
high
Serial Interface Register Maps
IO Wrap Register Map
1 0
POL_INTPI_FB
AB_AGC_PIN_
FREEZE
R/W-0h
1 0
OVR_INTPI_FB
AB_AGC_PIN_
FREEZE
R/W-1h R/W-0h
1169