Texas Instruments AFE79 Series Programming & User Manual page 1152

IO Wrap Register Map
2.16.464 Register 87Dh (offset = 87Dh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1 RXD_DSA_GAIN_
0
OVR_INTPI_RXD_
0-0
DSA_GAIN_0
2.16.465 Register 880h (offset = 880h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_RXD_
2-1
DSA_GAIN_1
POL_INTPI_RXD_
0-0
DSA_GAIN_1
2.16.466 Register 881h (offset = 881h) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1 RXD_DSA_GAIN_
1
OVR_INTPI_RXD_
0-0
DSA_GAIN_1
1152
Serial Interface Register Maps
Figure 2-2727. Register 87Dh
5 4
Table 2-2743. Register 87D Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2728. Register 880h
5 4
Table 2-2744. Register 880 Field Descriptions
Type Reset
R/W 0h
R/W 0h
Figure 2-2729. Register 881h
5 4
Table 2-2745. Register 881 Field Descriptions
Type Reset
R/W 1h
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
OVR_SEL_INT
PI_RXD_DSA_
Description
control to select whether the input function
intpi_rxd_dsa_gain_0 needs to be overriden ot not. 1 indicates
override.
override value for ovr_sel_intpi_rxd_dsa_gain_0 is made high
3 2
SEL_INTPI_RXD_DSA_GAIN_1
R/W-0h
Description
select control for intpi_rxd_dsa_gain_1. 0 indicates take from
parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
polarity control for intpi_rxd_dsa_gain_1. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PI_RXD_DSA_
Description
control to select whether the input function
intpi_rxd_dsa_gain_1 needs to be overriden ot not. 1 indicates
override.
override value for ovr_sel_intpi_rxd_dsa_gain_1 is made high
Submit Documentation Feedback
www.ti.com
1 0
OVR_INTPI_R
XD_DSA_GAIN
GAIN_0 _0
R/W-1h R/W-0h
1 0
POL_INTPI_RX
D_DSA_GAIN_
1
R/W-0h
1 0
OVR_INTPI_R
XD_DSA_GAIN
GAIN_1 _1
R/W-1h R/W-0h
SBAU337 – May 2020