Texas Instruments AFE79 Series Programming & User Manual page 1199

www.ti.com
2.16.604 Register 10BCh (offset = 10BCh) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_ALAR
0-0
M_1
2.16.605 Register 10BDh (offset = 10BDh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPO_
1-1
ALARM_1
OVR_INTPO_ALA
0-0
RM_1
2.16.606 Register 10C0h (offset = 10C0h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_ALAR
0-0
M_2
SBAU337 – May 2020
Submit Documentation Feedback
Figure 2-2867. Register 10BCh
5 4
Table 2-2883. Register 10BC Field Descriptions
Type Reset
R/W 0h
Figure 2-2868. Register 10BDh
5 4
Table 2-2884. Register 10BD Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2869. Register 10C0h
5 4
Table 2-2885. Register 10C0 Field Descriptions
Type Reset
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
Description
polarity control for intpo_alarm_1. 0 indicates pass through
from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PO_ALARM_1
Description
control to select whether the input function intpo_alarm_1
needs to be overriden ot not. 1 indicates override.
override value for intpo_alarm_1 when ovr_sel_intpo_alarm_1
is made high
3 2
Description
polarity control for intpo_alarm_2. 0 indicates pass through
from GPIO when selected 1 indicates inverted signal
Serial Interface Register Maps
IO Wrap Register Map
1 0
POL_INTPO_A
LARM_1
R/W-0h
1 0
OVR_INTPO_A
LARM_1
R/W-1h R/W-0h
1 0
POL_INTPO_A
LARM_2
R/W-0h
1199