Texas Instruments AFE79 Series Programming & User Manual page 1197

www.ti.com
2.16.598 Register 10A0h (offset = 10A0h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_RXD
0-0
_PKDET_1
2.16.599 Register 10A1h (offset = 10A1h) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPO_
1-1
RXD_PKDET_1
OVR_INTPO_RXD
0-0
_PKDET_1
2.16.600 Register 10A4h (offset = 10A4h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_RXD
0-0
_PKDET_2
SBAU337 – May 2020
Submit Documentation Feedback
Figure 2-2861. Register 10A0h
5 4
Table 2-2877. Register 10A0 Field Descriptions
Type Reset
R/W 0h
Figure 2-2862. Register 10A1h
5 4
Table 2-2878. Register 10A1 Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2863. Register 10A4h
5 4
Table 2-2879. Register 10A4 Field Descriptions
Type Reset
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
Description
polarity control for intpo_rxd_pkdet_1. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PO_RXD_PKD
Description
control to select whether the input function intpo_rxd_pkdet_1
needs to be overriden ot not. 1 indicates override.
override value for intpo_rxd_pkdet_1 when
ovr_sel_intpo_rxd_pkdet_1 is made high
3 2
Description
polarity control for intpo_rxd_pkdet_2. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
Serial Interface Register Maps
IO Wrap Register Map
1 0
POL_INTPO_R
XD_PKDET_1
R/W-0h
1 0
OVR_INTPO_R
XD_PKDET_1
ET_1
R/W-1h R/W-0h
1 0
POL_INTPO_R
XD_PKDET_2
R/W-0h
1197