Texas Instruments AFE79 Series Programming & User Manual page 1207

www.ti.com
2.16.628 Register 11BCh (offset = 11BCh) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_FBC
0-0
D_PKDET_2
2.16.629 Register 11BDh (offset = 11BDh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPO_
1-1
FBCD_PKDET_2
OVR_INTPO_FBC
0-0
D_PKDET_2
2.16.630 Register 11C0h (offset = 11C0h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
POL_INTPO_FBC
0-0
D_PKDET_3
SBAU337 – May 2020
Submit Documentation Feedback
Figure 2-2891. Register 11BCh
5 4
Table 2-2907. Register 11BC Field Descriptions
Type Reset
R/W 0h
Figure 2-2892. Register 11BDh
5 4
Table 2-2908. Register 11BD Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2893. Register 11C0h
5 4
Table 2-2909. Register 11C0 Field Descriptions
Type Reset
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
Description
polarity control for intpo_fbcd_pkdet_2. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PO_FBCD_PK
Description
control to select whether the input function
intpo_fbcd_pkdet_2 needs to be overriden ot not. 1 indicates
override.
override value for intpo_fbcd_pkdet_2 when
ovr_sel_intpo_fbcd_pkdet_2 is made high
3 2
Description
polarity control for intpo_fbcd_pkdet_3. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
Serial Interface Register Maps
IO Wrap Register Map
1 0
POL_INTPO_F
BCD_PKDET_2
R/W-0h
1 0
OVR_INTPO_F
BCD_PKDET_2
DET_2
R/W-1h R/W-0h
1 0
POL_INTPO_F
BCD_PKDET_3
R/W-0h
1207