Texas Instruments AFE79 Series Programming & User Manual page 1167

www.ti.com
2.16.509 Register 958h (offset = 958h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_RXB_
2-1 AGC_PIN_FREEZ
E
POL_INTPI_RXB_
0-0 AGC_PIN_FREEZ
E
2.16.510 Register 959h (offset = 959h) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1 RXB_AGC_PIN_F
REEZE
OVR_INTPI_RXB_
0-0 AGC_PIN_FREEZ
E
2.16.511 Register 95Ch (offset = 95Ch) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_RXC_
2-1 AGC_PIN_FREEZ
E
SBAU337 – May 2020
Submit Documentation Feedback
Figure 2-2772. Register 958h
5 4
Table 2-2788. Register 958 Field Descriptions
Type Reset
R/W 0h
R/W 0h
Figure 2-2773. Register 959h
5 4
Table 2-2789. Register 959 Field Descriptions
Type Reset
R/W 1h
R/W 0h
Figure 2-2774. Register 95Ch
5 4
Table 2-2790. Register 95C Field Descriptions
Type Reset
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
3 2
SEL_INTPI_RXB_AGC_PIN_FR
EEZE
R/W-0h
Description
select control for intpi_rxb_agc_pin_freeze. 0 indicates take
from parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
polarity control for intpi_rxb_agc_pin_freeze. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
3 2
OVR_SEL_INT
PI_RXB_AGC_
PIN_FREEZE
Description
control to select whether the input function
intpi_rxb_agc_pin_freeze needs to be overriden ot not. 1
indicates override.
override value for ovr_sel_intpi_rxb_agc_pin_freeze is made
high
3 2
SEL_INTPI_RXC_AGC_PIN_FR
EEZE
R/W-0h
Description
select control for intpi_rxc_agc_pin_freeze. 0 indicates take
from parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
Serial Interface Register Maps
IO Wrap Register Map
1 0
POL_INTPI_RX
B_AGC_PIN_F
REEZE
R/W-0h
1 0
OVR_INTPI_R
XB_AGC_PIN_
FREEZE
R/W-1h R/W-0h
1 0
POL_INTPI_RX
C_AGC_PIN_F
REEZE
R/W-0h
1167