Table of Contents
Advertisement
Figure 56. Installing the expansion riser 2A
Figure 57. Installing the expansion riser 2B
Next steps
1. Follow the procedure listed in
2. Install any device drivers required for the card as described in the documentation for the card.
Removing expansion card from the expansion card riser
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. If applicable,
remove the air
4. If applicable, disconnect the cables from the expansion card.
5. When removing a card from riser 2 or 3, ensure that the PCIe card holder latch is closed.
80
Installing and removing system components
After working inside your system
Safety instructions
Before working inside your system
shroud.
on page 35.
on page 34.
on page 35.
Advertisement
Table of Contents
