Toshiba 4560 Service Manual page 94

7.7.22 Exit fan motor
(1) Remove the upper exit cover and rear cover.
(2) Remove the 2 screws each which secure the
upper-unit release lever and the upper exit
roller unit.
(3) Take out the 1 screw securing the fan unit.
(4) Remove the connector.
(5) Remove the exit fan motor.
7.7.23 Carriage drive wire
(1) Remove carriages 1 and 2.
(2) Remove the scanning motor and the belt.
(3) Remove the belt drive pulley (1 screw).
(4) Remove the fan unit.
4560/4570 OPTICAL
Upper-unit release lever
Connector
Fan unit
Belt drive pulley
7 - 32
Exit fan motor
Screw
Nov. 1997 © TOSHIBA