Toshiba 4560 Service Manual page 266

A-4 Original stop = original feed completion
A-5 From start of advance feed of next original to original alignment
(A4 original wide, letter-size original wide)
4560/4570 RADF
• After a fixed amount of time has elapsed
since the motor stopped, the transport
clutch is turned OFF to complete original
feed.
• Drive motor
• Feed clutch
• Transport clutch
• Weight
• Pick-up roller
• Feed roller
• Aligning roller
• Transport belt
• If the original that was fed in A-4step is
A4-wide or letter-size wide, the original
on the tray is fed in advance to start
two-step pre-feeding.
• The original is fed for a fixed number of
pulses after the aligning sensor turns
ON, and the motor stops.
18 - 8
: Rotates in reverse
direction.
: Turns ON.
: Turns OFF.
: Falls.
: Rotates.
: Rotates.
: Stops.
: Stops.
Nov. 1997 © TOSHIBA