Toshiba 4560 Service Manual page 40

• During paper feeding from the copier and the pedestal:
After the feed clutch is turned ON, if the paper stop switches (S7/S16) do not come ON within
a fixed time
Paper misfeeding (E13 – E19)
E13 – E19: The error code is different according to the cassette used.
B-2) ADD TONER (
Toner density has become low
Toner empty detection: Auto-toner sensor
Control circuit:
Clearing method:Replace the toner cartridge and close the front cover.
B-3) REPLACE TONER BAG (
The toner bag becomes full of toner
The toner-recovery auger moves towards the rear of the copier: the toner-full switch (S13) will be
turned ON.
REPLACE TONER BAG display
• When the toner-full switch (S13) comes ON during copying
Copying will stop after the last sheet has exited during copying
Clearing method: Replace with a new toner bag.
C-1) Service call
If the CLEAR/STOP key and the "8" key are pressed simultaneously when the SERVICE CALL
symbol is flashing, one of the error codes will appear on the message display.
For the contents of the error codes, refer to the "SERVICE HANDBOOK".
4560/4570 OPERATION
)
the ADD TONER symbol appears: the copying is not possible
Toner supply operation: copying is possible
)
4 - 10 Nov. 1997 © TOSHIBA