Toshiba 4560 Service Manual page 185

(2) Take out the unit toward the feed side.
(3) Remove the stop-ring, pull out the shaft, and
take out the separation roller.
13.5.3 Drive system
[A] ADU motor
(1) Remove the upper paper guide by unscrewing
two screws.
Take out the open guide stopper from the open
guide (lower) after removing one stop-ring.
(2) Take out the open guide unit (upper and lower)
by removing two stop-rings and one snap pin.
(3) Remove the motor cover by unscrewing a screw.
4560/4570 ADU
Separation roller unit
Separation roller
Stop-ring
Motor cover
13 - 18
Shaft
Open guide unit
(upper and
lower)
Paper guide (upper)
Nov. 1997 © TOSHIBA