Toshiba 4560 Service Manual page 324

18.13.5 Feed unit
(1) Remove the original feed tray.
(2) Disconnect one connector at the rear and re-
move two screws, then move the ADF unit to-
ward the rear to take it out in an upward direc-
tion.
(3) Place the entire unit upside down and remove
the transport unit and the cover (3 screws).
Note: (M4 8)
(4) Remove five connectors from the PC board.
4560/4570 RADF
ADF unit
18 - 66
Cover
Nov. 1997 © TOSHIBA