Toshiba 4560 Service Manual page 327

(2) Pull out the clutch with the pin in the direction
of the arrow.
(3) Remove the pin and the claw, then draw the
shaft.
(4) When the connector is removed, the clutch can
be taken out.
18.13.8 Jam access cover
(1) Remove the feed unit.
(2) When two shouldered screws (front and rear)
are removed, the jam access cover can be
taken out.
18.13.9 Separation unit
(1) Open the jam access cover.
(2) Remove two screws and take out the separation
unit.
(3) Draw the holder from the bracket.
(Be careful to prevent the pressure spring
coming off.)
Nov. 1997 © TOSHIBA
Claw
18 - 69
Clutch
Claw
Shaft
Jam access cover
Spring Separation unit
4560/4570 RADF