Toshiba 4560 Service Manual page 270

B-6 To completion of splice
B-7 Transport to copy glass surface
B-8 Completion of original feed
4560/4570 RADF
• Drive motor
• Feed clutch
• Transport clutch
• Aligning roller
• Transport belt
• The motor is rotated in the forward
direction for a fixed number of pulses,
and the leading edge of the 2nd original
is spliced with the trailing edge of the 1st
original.
• Drive motor
• Feed clutch
• Transport clutch
• Aligning roller
• Transport belt
• The aligning sensor turns OFF, and the
original is transported for a fixed number
of pulses.
• The original is fed for a fixed number of
pulses after the aligning sensor turns OFF,
and the motor stops.
• After a fixed amount of time has elapsed
since the motor stopped, the transport
clutch is turned OFF to complete original
feed.
18 - 12
: Rotates in forward
direction.
: Turns OFF.
: Turns OFF.
: Rotates.
: Stops.
: Rotates in forward
direction.
: Turns OFF.
: Turns ON.
: Rotates.
: Rotates in forward
direction.
Nov. 1997 © TOSHIBA