Toshiba 4560 Service Manual page 268

B-1 Original loading
B-2 From PRINT button ON to 1st original alignment
B-3 Transport of 1st original to pause position after drive motor ON
4560/4570 RADF
• Drive motor
• Feed clutch
• Transport clutch
• Weight
• Pick-up roller
• Feed roller
• Aligning roller
• Transport belt
• The original is loaded.
• Drive motor
• Feed clutch
• Transport clutch
• Weight
• Pick-up roller
• Feed roller
• Aligning roller
• Transport belt
• The original is fed for a fixed number of
pulses after the aligning sensor turns
ON, and the motor stops.
• Drive motor
• Feed clutch
• Transport clutch
• Aligning roller
• Transport belt
• The aligning sensor turns OFF, and the
original is transported for a fixed number
of pulses.
18 - 10
: Turns OFF.
: Turns OFF.
: Turns OFF.
: Rises.
: Stops.
: Stops.
: Stops.
: Stops.
: Rotates in reverse
direction.
: Turns ON.
: Turns OFF.
: Falls.
: Rotates.
: Rotates.
: Stops.
: Stops.
: Rotates in forward
direction.
: Turns OFF.
: Turns ON.
: Rotates.
: Rotates in forward
direction.
Nov. 1997 © TOSHIBA