(5) Peel off the seal and then remove the mag-
netic roller bearing. Shifting the magnetic roller
in the direction of the arrow, remove it from the
slit in the frame and pull it out towards the front.
(6) Remove the V-ring.
Notes: 1. Pay attention to the direction (obverse/
reverse) of the V-ring when reassembling.
2. After reassembly, adjust the polarity po-
sition and the doctor sleeve gap accord-
ing to the method given in the Service
Handbook.
4560/4570 DEVELOPER
Magnetic roller
Seal
Magnetic roller bushing
V-ring
10 - 12
Nov. 1997 © TOSHIBA