Toshiba 4560 Service Manual page 123

[A] Grid
(1) Pull the grid in the direction of the arrow and
unhook it.
Note: During replacement, do not touch the
mesh section of the grid with your bare
hands.
[B] Replacement of charger wire
Total length: 353 mm
Tungsten wire: ø0.06 mm
(1) Remove the terminal cover at the front and rear.
Nov. 1997 © TOSHIBA
Notch
V-groove
Terminal (R)
9 - 9
Flat end screw driver
Grid
[Rear side]
Terminal (F)
Spring hanger
Terminal cover
[Front side]
V-groove
Terminal cover
[Rear side]
4560/4570 DRUM