Toshiba 4560 Service Manual page 269

B-4 From drive motor ON to 1st original pause
B-5 To alignment of 2nd original
Nov. 1997 © TOSHIBA
• Drive motor
• Feed clutch
• Transport clutch
• Aligning roller
• Transport belt
• The original is fed for a fixed number of
pulses after the aligning sensor turns OFF,
and the motor stops.
• The trailing edge of the 1st original exits
the original feed section, and is positioned
on the original stopper.
• Drive motor
• Feed clutch
• Transport clutch
• Weight
• Pick-up roller
• Feed roller
• Aligning roller
• Transport belt
• The original is fed for a fixed number of
pulses after the aligning sensor turns
ON, and the motor stops.
18 - 11
: Rotates in forward
direction.
: Turns OFF.
: Turns ON.
: Rotates.
: Rotates in forward
direction.
: Rotates in reverse
direction.
: Turns ON.
: Turns OFF.
: Falls.
: Rotates.
: Rotates.
: Stops.
: Stops.
4560/4570 RADF