Toshiba 4560 Service Manual page 164

(10)Slide the heat roller to the rear side and pull it
off from the front side frame, then take out the
heat roller toward the upper side.
Note: Be careful not to damage the heat roller sur-
face by knocking it against the bracket, etc.
12.5.4 Pressure roller
(1) Remove the fuser unit.
(2) Remove the heat roller.
(3) Turn the pressure roller separation claw unit
(2 screws, black color).
4560/4570 FUSER
Bearing
Pressure roller separation claw unit
12 - 10
C-ring
[Front side]
Nov. 1997 © TOSHIBA