Toshiba 4560 Service Manual page 153

11.4.3 Recovery blade
(1) Turn the cleaner unit upside down.
(2) Remove the spring.
(3) Remove the separation claw lever.
(4) Remove the separation claw holder (4 screws).
(5) Remove the recovery blade (2 screws).
11.4.4 Separation claw
(1) Turn the cleaner unit upside down.
(2) Remove the spring.
(3) Remove the separation claw lever.
(4) Remove the 4 screws and take out the separa-
tion claw with the holder.
(5) Remove the separation claw from its fitting.
11.4.5 Charger output adjustment block
(1) Remove the cleaner unit.
(2) Remove the inner cover (upper).
(3) Remove the connector of the solenoid.
(4) Remove a screw.
4560/4570 CLEANER
Separation claw lever
Separation claw holder
Separation claw holder
Connector
Charger output adjustment block
11 - 6
Spring
Recovery blade
Separation claw
Nov. 1997 © TOSHIBA