11.4.6
Drum separation claw solenoid
(1) Remove the charger output adjustment block.
(2) Remove a spring.
(3) Remove a screw.
11.4.7
Toner-full switch
(1) Remove the main motor (2 screws).
(2) Remove the drive unit (5 screws).
(3) Remove the toner-full switch.
Nov. 1997 © TOSHIBA
Drum separation claw solenoid
Drum drive gear
Toner full switch
Fuser drive gear
11 - 7
Spring
Dev-unit drive gear
Manual feed drive gear
& assistant drive gear
4560/4570 CLEANER