Toshiba 4560 Service Manual page 178

13.5.2 Transport system
[A] ADU vertical transport roller, exit roller and
EXIT/ADU selection gate
(1) Open the front cover and the clamshell. To re-
move the ADU exit unit, open the unit and re-
move the screw of the unit's pivot bracket lo-
cated at the rear. Remove the bracket.
(2) Lift the rear side of the unit and pull out the
pivot.
(3) Take out two screws from the ADU exit unit and
remove the vertical transport guide unit.
Nov. 1997 © TOSHIBA 13 - 11 4560/4570 ADU