Toshiba 4560 Service Manual page 26

Locking support
2.4.2 Removal of main PC boards
[A] Logic PC board (PWA-LGC)
(1) Remove the lower rear cover.
(2) Remove 20 connectors.
(3) Remove the lock supports (4 pcs.)
PWA-LGC
(4) Remove the logic PC board.
[B] Power supply PC board (PS-ACC)
PS-ACC
(1) Remove the connector bracket (2 screws).
(2) Remove 14 connectors.
(3) Remove 4 screws.
(4) Remove the power supply PC board.
Connector bracket
Connector
[C] Lamp regulator PC board (PWA-LRG)
(1) Remove the upper rear cover.
(2) Remove 2 connectors.
(3) Remove the lamp regulator PC board (4 locking
supports).
PWA-LRG
Connector
Nov. 1997 © TOSHIBA 2 - 19 4560/4570 GENERAL