Toshiba 4560 Service Manual page 332

(3) Remove two idle gears (one of the two gears
is fixed with the grip ring).
(4) Remove the bushing of the reversing roller front
side (1 E-ring).
(5) Tilting the reversing roller, remove the rear side
E-ring, and then the gear (spring clutch).
(6) Pull out the roller.
18.13.18 Exit sensor
(1) Remove the stay (4 screws).
(2) Remove the sensor board from the guide
(1 screw).
4560/4570 RADF
Stay
Exit cover sensor
18 - 74
Gear
Reversing roller
Nov. 1997 © TOSHIBA