Toshiba 4560 Service Manual page 39

• Trailing-edge detection by the exit switch (S9):
(E02)
Aligning motor goes OFF.
The exit switch (S9) goes OFF (detects pa-
per exit)
* When the exit switch (S9) does not go
OFF even after 1.396 seconds:
The CLEAR PAPER symbol appears (E02),
and copying stops.
• Immediately after power ON
Exit switch (S9) is detecting paper (ON)
CLEAR PAPER (E03)
• If the front cover is opened during copying
CLEAR PAPER (E04)
• Leading edge jam detection by the paper stop switch in front of the aligning roller:
After the leading edge of the paper passes the transport rollers, if the paper stop switch-1 (S7)
is not turned ON within a fixed time
Paper misfeeding (E05)
• During paper feeding from the ADU:
After the feed clutch is turned ON, if the paper stop switch (S16) does not come ON within a
fixed time.
Paper misfeeding (E11)
• During paper stacking in the ADU:
If the ADU jam switch (SA4) does not detect any paper at the fixed timing
Paper misfeeding (E08)
Nov. 1997 © TOSHIBA
1.396 sec*
Aligning motor
Exit switch
Timer
4 - 9
Off
On
0
1.396 sec
CLEAR PAPER (E02)
4560/4570 OPERATION