1
Under Diagnostics click Test Server LEDs to test the media server LEDs.
2
Observe the Active/Standby and U2 LEDs on the front of the media server and the
transmit LED on the duplication card on the back of the media server to ensure they are
blinking. The blinking stops after about a minute. See
page 215
for more specific information.
Busy Out Standby Media Server
The following administration uses the services laptop computer connected to media server 2
and the media server Web interface.
This action prevents unexpected interchanges during the remainder of the installation.
1
Under Server click Busy Out Server.
Click Busy Out.
2
Under Server click View Summary Status and verify that media server is busied out.
3
Disconnect from the Media Server
1
Unplug the services laptop from media server 2.
October 2002
Configure Media Server 2
''S8700 Media Server LEDs'' on
43