Transmitting; Emergency Alarm; Side Key [Pf1] Function Instruction - Alinco PH3DJ-500 Instruction Manual

Table of Contents

BASIC OPERATIONS

Transmitting

According to the different settings for [PF2] side key, holding down [PF2] key to monitor a moment, to

ensure the main channel is not busy, holding down the PTT key, speak into the microphone.

Please keep the distance between mouse and speaker to be 2.5-5CM, speak in normal tone to get the

best acoustic fidelity.

NOTE: When press and hold PTT key, transceiver is transmitting if the red LED light is on, release PTT

key to receive calls.

Under standby state, press and hold alarm key until LCD displays "ALARM", Emergency alarm function

is started. This transceiver has 4 Alarm modes for optional, can be setup in programming software. Power

off transceiver to exit Alarm.

Side Key【PF1】function instruction

1. Battery capacity inquiry: Under standby, press [PF1] key, LCD displays current battery capacity, press

this key again to exit.

2. Transmit tone pulse frequency: Press and hold PTT key, then press [PF1] key to transmit selected tone

pulse frequency.

NOTE: The tone pulse frequency can be set to 1750Hz, 1450Hz, 1000Hz or 2100Hz in programming software.

Table of Contents

Dj-500t