BASIC OPERATIONS
Turn the Radio On & OFF
Under power-on state, please turn [POWER]/[VOLUME] anticlockwise till hearing "Click" to turn off the
transceiver. A beep sounds and displays channels or frequencies.
Under power-off state, please turn [POWER]/[VOLUME] clockwise to turn off the transceiver.
Adjusting Volume
Under power-on state, turn [POWER] /[VOLUME] to adjust volume. Clockwise-up, anticlockwise -down.
NOTE:Press the side key programmed as Squelch Off Momentary to monitor the background noise. Turn
[POWER]/ [VOLUME] to adjust the level by listening to the noise sound.
NEVER USE EARPHONE while adjusting audio level. The max audio output is 1W, and it's loud enough
to hurt your eardrums.
You may feel a static shock when wearing an earphone in a dry atomosphere but it's not a defect of
product but a cause of nature.It is the same shock you feel typically when opening a door of a car in
certain conditions.
Switch Between Main Band and Sub Band
Under standby state, press
band. The main band is shown with an arrow icon on the left.
11
key to switch channel between Main band and Sub