Table of Contents
Advertisement
MB Accessories
@ Open the Box and Check That the Following Items Have Been Included:
* Antenna
- Belt clips
> Hand Strap
- Battery Recharger (EDC-93(120V), EDC-94(230V)) *
~ Ni-Cd battery pack 6.0V — 700mAh (EBP-45N) *
- Instruction manual
- Warranty *
- Cautions about PL
*Standerd Accessories May Differ Depending On The Version
@ Connecting and Disconnecting the Antenna
4. Hold the antenna by its base.
2. Align the grooves at the base of
the antenna with the protrusions
on the antenna connector.
3. Slide the antenna down and turn
it clockwise until it stops.
4. Confirm that the antenna is
securely connected.
* Turn the antenna counter-clockwise to disconnect the antenna.
@ Attaching the Hand Strap
; {
Atiach the hand strap as shown in
the illustration on the left.
. Attaching and Detaching the Belt Clip
* Attaching the Belt Clip
Attach the belt clip to the back of the transceiver until it clicks.
Detaching the Belt Clip
Push up the catches of the belt clip, and pull it.
Attaching
Detaching
@ Attaching and Detaching the Ni-Cd Battery Pack and Battery Case
Attaching the Ni-Cd battery pack or battery case:
Align with the grooves on the tranceiver, and slide in the direction
of the arrow until it clicks.
Catches
Attaching
Detaching
Detaching the Ni-Cd battery pack or battery case:
Push up the catches, and pull the battery pack or case free of the
transceiver.
Advertisement
Table of Contents
