Dc301 Nvm Initialization; Dc305 Ui Panel Diagnostics - Xerox VersaLink B7025 Service Manual

dC301 NVM Initialization

Purpose
To reset the values of all applicable NVM parameters to default.
Procedure
1. Enter Diagnostics, GP 1.
2. Touch dC301 Initialize NVM.
3. Select the area to be initialized. Refer to
Table 1 NVM areas
Area Comments
IOT 1 Drive PWB NVM. After initializing the IOT 1 NVM, ensure the tray module
type is correctly set, refer to the
IOT 2 Do not use.
Finisher Integrated finisher or LX office finisher NVM.
IFM Do not use.
IISS - IIT/IPS Scanner NVM.
IISS - Extension Do not use.
Input Device DADF NVM.
Sys - System ESS PWB NVM.
Sys - User SD card customer settings. The installation wizard will have to be run
after initializing the SD card NVM.
Fault Counter Fault history.
HCS 1 Do not use.
HCS 2 Do not use.
PFIM Do not use.
4. Touch Start.
5. Follow the UI messages to initialize the NVM.
6. Touch Close to return to the Diagnostics screen.
7. Enter dC131. Ensure NVM value 790-900 is set to 1. If the NVM value had to be changed,
switch off, then switch on the machine,
working.
8. Exit diagnostics, GP 1.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Table 1.
077-211 Tray Module Mismatch RAP.
GP 10. Verify that the Embedded Web Server is

dC305 UI Panel Diagnostics

Purpose
To test the LED and audio functions of the user interface.
Procedure
1. Enter Diagnostics, GP 1.
2. Touch dC305 UI Panel Diagnostics.
3. Touch LED Test or Audio Test.
4. Exit diagnostics, GP 1.
LED Test
1. Touch the 1 or more LEDs to be diagnosed:
• Interactive
• Error
• NFC
• Power
• Data
2. Touch the display pattern to be diagnosed. The selected LEDs are switched on.
3. Touch All Off.
4. Touch the back button (top left) to return to the Diagnostics screen.
Audio Test
1. Touch Volume. Adjust the volume as necessary.
2. Touch the pattern to be diagnosed. The audio sounds with the specified volume and pat-
tern:
• Pattern 1
• Pattern 2
• Pattern 3
• Pattern 4
• Pattern 5
• Pattern 6
3. Touch the back button (top left) to return to the Diagnostics screen.
April 2017
6-49
General Procedures and Information
dC301, dC305