Setting Custom Colors; Network Settings - Xerox DocuColor 2240 User Manual

U G ( M
S E R U I D E A C H I N E

Setting Custom Colors

Custom Colors 1 ~ 6

Network Settings

4 – 3 8
A )
D M I N I S T R A T O R
This sets up the user registered colors used in Single Color and
Dual Colors on the Output Color screen.
Assign user registered colors, Yellow (0~100), Magenta (0~100),
Cyan (0~100), to Custom Color Buttons 1 ~ 6. The default is 0.
NOTE: Adjust the registered color so that the sum of Yellow,
Magenta and Cyan is 240% or less.
Network Settings consists of Port Setting, which determines the
type of interface of the main unit that is connected to clients, and
Protocol Setting, which determines the necessary condition for the
communication.
For more information on setting the Network Settings, refer to the
System Administrator's Guide.