Specifications - Toro Reelmaster 6500–D Service Manual

Specifications

Item
Traction Pump
Traction Relief Pressure
Charge Pressure
Traction Motor (front & rear w/4WD)
Steering/Reel Pump
Steering Relief Pressure
Valve Blocks
Front & Rear Reel Circuit Relief Pressure
Lift Relief Pressure
Reel Motor
Cross–over Relief Pressure
Hydraulic Filter
Hydraulic Fluid
Group 1 (for ambient temp. consistently below 100F)
Group 2 (Biodegradable)
Reservoir (Fig. 1)
*Equivalent Hydraulic Fluids (interchangeable):
Amoco 1000
International Harvester Hy–Tran
Texaco TDH
Shell Donax TD
Union Oil Hydraulic/Tractor Fluid
Chevron Tractor Hydraulic Oil
BP HYD TF
Exxon Torque Fluid
Conoco Power–Tran 3
Kendall Hyken 052
Phillips HG Fluid
Hydraulic System
ISO type 46/68 anti–wear hydraulic fluid (Mobil 424 or equiv.*)
ISO VG 32/46 anti–wear hydraulic fluid (Mobil EAL 224 H)
NOTE: A red dye additive for the hydraulic oil is avail-
able in 2/3 oz. bottles. One bottle is sufficient for 4 to
6 gallons of hydraulic oil. Order Part No. 44–2500 from
your authorized Toro Distributor.
Page 4 – 2 Rev. B
Servo controlled piston pump
3800 – 4200 PSI
Fixed displacement piston motor
3-section gear pump
1350 – 1450 PSI
Cartridge logic, elec./hyd., solenoid actuated
3000 – 3200 PSI
2600 – 2900 PSI
1400 – 1600 PSI
Spin–on cartridge type, 50 PSI by-pass
Reservoir capacity approx. 8.5 gal. U.S.
System capacity approx. 10 gal.U.S.
1
Figure 1
1. Hydraulic Reservoir Cap
Reelmaster 6500–D/6700–D
Description
150 – 210 PSI
Gear motor