Cutting Unit Operation Problems - Toro Reelmaster 6500–D Service Manual

Engine Kills When Traction Pedal Is Depressed
Cause
Seat lifting off seat switch.
Seat switch circuit open.
Battery Does Not Charge
Cause
Alternator belt slipping.
Faulty wiring.
Malfunctioning alternator.
Faulty battery.

Cutting Unit Operation Problems

See Quick Reference Troubleshooting Guide in this
section and Troubleshooting section of Chapter 4 – Hy-
draulic System.
Electrical System
Correction
Instruct operator to sit back in seat during operation.
Check seat plate hinges and seat support pin and
repair if faulty
Test seat switch and replace if faulty.
Check seat switch wiring and repair if faulty.
Correction
Adjust belt tension.
Check and repair wiring.
Repair or replace alternator.
Replace battery.
Page 5 – 32
Reelmaster 6500–D/6700–D