Steering Valve
(93–5165 or 94–9950)
Before Disassembly
Cleanliness is extremely important when repairing
steering control units. Work in a clean area. Before dis-
connecting the hydraulic lines, clean the port area of the
steering control unit. Before disassembly, drain the oil,
Reelmaster 6500–D/6700–D
Figure 134
then plug the ports and thoroughly clean the exterior.
During repairs, always protect machined surfaces.
1. Remove the seven capscrews and disassemble the
steering control unit as shown (Fig. 134).
2. Remove the plug and manual steering check valves.
Rev. B
Page 4 – 101
Hydraulic System