Alternate Adjustments
Tractors are setup at the factory appropriately for most
fairway mowing applications.
The following adjustments are available for fine–tuning
of the machine to the application:
Adjusting Cutting Unit Stop Chains
The lift chain of the cuttings units may be lengthened or
shortened to adjust for either ground following or ground
clearance of the cutting units. Refer to the cutting unit
operator manual for adjusting procedure.
Adjusting the Travel of the Front Three Cutting Units
Additional downward travel of the front three cutting
units may be desirable in highly contoured locations. If
any of the front three cutting units lift off the ground when
cresting a "hill", the front carrier frame may be lowered
by removing mounting bolts and repositioning frame in
the bottom set of holes in the main frame.
Model 03857, S/N 80001–80301
Cutting Units
Model 03858, S/N 80001–81418
Model 03859, S/N 80001–81992
Page 8 – 14
Rev. B
Reelmaster 6500–D/6700–D