Toro Reelmaster 6500–D Service Manual page 271

Adjusting Backlash
Backlash specification
Adjust shim thickness (between bearing housing of axle
housing (A) and bearing) to get specified backlash.
Shim stock for this adjustment is available in these thick-
nesses:
Thickness
Shim set
0.1 mm (0.004 in.)
0.2 mm (0.008 in.)
0.4 mm (0.016 in.)
Shim Between Differential and Axle Housing (B)
After obtaining specified backlash, determine amount of
shims needed:
1. Put gauge TOR4038 on axle housing (A) and read
clearance (a) between ball bearing and gauge.
2. Select from shim stock (shown above for backlash
adjustment) to match clearance (a).
Reelmaster 6500–D/6700–D
0.25 ~ 0.35 mm
(0.010 ~ 0.014 in.)
Part No.
77-4000
76-7290
76-7300
77-7310
Page 6 – 17
Figure 26
Figure 27
Axles, Planetaries and Brakes