Toro Reelmaster 6500–D Service Manual page 70

12. Remove the thermostat housing cover (Fig. 58,
Item 17).
13. Remove the thermostat housing (Item 18).
14. Remove the injectors (Item 19) and retrieve the
copper washer (Item 20), and flame trap washer
(Item 21).
15. Remove the glow plugs (Item 22).
Injection Pump Removal
1. Remove the timing belt.
2. Use injector pump gear puller TOR70153H, to re-
move injector pump gear (Fig. 58a, Item 5).
3. Remove the injection pump (Fig. 58b, Item 19).
4. Remove bracket (Item 20).
NOTE: If the pump needs to be inspected or repaired it
is recommended that is be done by an authorized CAV
Lucas ROTO DIESEL service dealer - especially during
the warranty period. Repairs by non-authorized dealers
WILL void the pump warranty.
IMPORTANT: Clean the injection pump and the area
around the injection pump before removing or serv-
icing it. DO NOT spray water onto a hot injection
pump.
Engine
TOR 80149
Page 3 - 46
Figure 58
TOR70153H
Figure 58a
Figure 58b
Reelmaster 6500-D/6700-D