Default SSH
service configuration
E-DOC-CTC-20051017-0155 v1.0
Use the following CLI command to see the default SSH service configuration.
=>:service system list name=SSH expand=enabled
Idx Name
Protocol
----------------------------------------------------------------------
1 SSH
tcp
Description................ SSH server
Properties................. server
Attributes................. state port aclip aclif aclifgroup map log
User Managed Attributes.... state aclip aclif aclifgroup map log
Attribute Values :
State...................... enabled
Port....................... 22
Ip Access List............. any
Interface Access List...... any
Interface Group Access List lan
Map List................... 22
Logging.................... disabled
SpeedTouch™ Remote Access
SrcPort
DstPort
Group
22
Chapter 8
93