Software activation key
management via the CLI
Applying for a
software key
E-DOC-CTC-20051017-0155 v1.0
You can overview the software modules and their status and link information via
the SpeedTouch™ Command Line Interface (CLI).
See
"2 SpeedTouch™ Command Line Interface" on page 5
how to access the Command Line Interface.
The
:software addon list
current software modules, their status, and some additional information:
=>:software addon list
VPN256-32 module info :
Software key status : No Key
Filename :
Link : http://www.speedtouch.com/homeprod/addon.htm
Teaser : IPSec based VPN (256 Sessions, 32 Profiles)
VPN16-4 module info :
Software key status : No Key
Filename :
Link : http://www.speedtouch.com/homeprod/addon.htm
Teaser : IPSec based VPN (16 Sessions, 4 Profiles)
VPN16-1 module info :
Software key status : No Key
Filename :
Link : http://www.speedtouch.com/homeprod/addon.htm
Teaser : IPSec based VPN (16 Sessions, 1 Profile)
ISDN module info :
Software key status : No Key
Filename :
Link : http://www.speedtouch.com/homeprod/addon.htm
Teaser : ISDN Backup
SIP256 module info :
Software key status : No Key
Filename :
Link : http://www.speedtouch.com/homeprod/addon.htm
Teaser : SIP PBX (256 User Agents)
To allow for a successful activation of software modules no parts of the :
addon
CLI command group should be changed, unless specifically instructed by
your Service Provider.
Contact your local product dealer for available software module activation
possibilities.
SpeedTouch™ Software Modules
for more information on
CLI command group allows you to overview the
Chapter 5
software
47