How To Configure The Ppp Connection - THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual

9.3.2 How to Configure the PPP Connection

How to Configure the
PPP Connection Via the
Web Interface
How to Configure the
PPP Connection Via CLI
E-DOC-CTC-20051017-0155 v1.0
If you used the Web interface to configure the Dial-In connection, you do not need
any additional configuration.
Use the following command sequence to configure the PPP connection via CLI:
[ppp]=>ifconfig
intf = bu_isdn
[dest] = buisdn
[user] = cpesit@rednet
[password] =
[pcomp] = disabled
[accomp] = enabled
[trace] = disabled
[auth] = auto
[restart] = enabled
[retryinterval] = 10
[passive] = disabled
[silent] = disabled
[echo] = enabled
[mru] = 1500
[laddr] =
[raddr] =
[netmask] =
[format] =
[format] = none
[pool] =
[savepwd] = enabled
[demanddial] = enabled
[doddelay] = 30
[primdns] =
[secdns] =
[dnsmetric] =
[idletime] = 45
[idletrigger] = Tx
[unnumbered] = disabled
:ppp ifconfig intf=bu_isdn format=none
[ppp]=>
The Integrated SpeedTouch™ ISDN Modem
Chapter 9
121