Chapter 9
The Integrated SpeedTouch™ ISDN Modem
9.4.2 How to Configure the PPP Connection
How to Configure the
PPP Connection Via the
Web Interface
How to Configure the
PPP Connection Via CLI
128
If you used the Web interface to configure the Dial-In connection, you do not need
any additional configuration.
Use the following command sequence to configure the PPP connection via CLI:
[ppp]=>ifconfig
intf = bu_isdn
[dest] = buisdn
[user] = cpesit@rednet
[password] =
[pcomp] = disabled
[accomp] = enabled
[trace] = disabled
[auth] = auto
[restart] = enabled
[retryinterval] = 10
[passive] = disabled
[silent] = disabled
[echo] = enabled
[mru] = 1500
[laddr] =
[raddr] =
[netmask] =
[format] =
[format] = none
[pool] =
[savepwd] = enabled
[demanddial] = enabled
[doddelay] = 30
[primdns] =
[secdns] =
[dnsmetric] =
[idletime] = 45
[idletrigger] = Tx
[unnumbered] = disabled
:ppp ifconfig intf=bu_isdn format=none
[ppp]=>
E-DOC-CTC-20051017-0155 v1.0