THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual page 130

Chapter 9
The Integrated SpeedTouch™ ISDN Modem
CLI Parameters:
120
The table below provides a description of the relevant parameters:
Parameter Value
intf text string
number numeric
mlppp enabled or disabled
BODStart Numerical (in kbps)
Default: 40
BODEnd Numerical (in kbps)
Default: 38
mode dialout
callback enabled or disabled
Description
name of the ISDN interface
Dial-in number for the ISDN line
Enable or disable multilink ppp. This
means that the ppp can be
established over 1 or 2 ISDN B links
(64 kbps), thus creating a bandwidth
of either 64 or 128 kbps
If multilink ppp is enabled and the
required bandwidth exceeds this
value, a second ISDN B link is used
for the ppp connection
If multilink ppp is enabled and the
required for it drops below this
value, the second ISDN B link in the
ppp connection is dropped.
SpeedTouch™is set for dialout. This
value is mandatory.
Enable or disable callback. Note that
the dial-in end must also be set for
callback if you enable it.
E-DOC-CTC-20051017-0155 v1.0