Table of Contents
Advertisement
Chapter 12
SLA Monitoring.
SLA Traceroute result
200
Now that the SLA traceroute process has been started you can view the SLA
traceroute results.
Use the following command:
=>:sla traceroute list
route: [owner = modem] dest = 11.0.0.138
size = 0 timeout[s] = 3 probePerHop = 3
port = 33434 maxTTL = 30 InitialTTL = 1
frequency[s] = 0 maxrows = 50
maxfailures = 5 createHopEntries = no
trapflag =
type = UdpEcho storagetype =nonVolatile
descr =
srcaddr = 0.0.0.0
intf = none
dffield = no
result Info
status = stopped
currHopCount = 1 currProbeCount = 3
testAttempts = 1 testSuccesses = 1
lastGoodPath = 02/01/70 06:02:22.242930
=>
bypassrt = no dsfield = 0
E-DOC-CTC-20051017-0155 v1.0
Advertisement
Table of Contents
