Table of Contents
Advertisement
Chapter 8
SpeedTouch™ Remote Access
Refinement of the
86
If needed, the service can be fine-tuned to restrict the allowed traffic to:
Service
A single IP address
A subnet
A range of IP addresses
Use the following CLI command to restrict the allowed traffic to 1 IP address.
=>:service system ipadd name=HTTPs ip=192.6.11.5
=>
Use the following CLI command to restrict the allowed traffic to a subnet.
=>:service system ipadd name=HTTPs ip=192.6.11.0/24
=>
Use the following CLI command to restrict the allowed traffic to a range of IP
addresses.
=>:service system ipadd name=HTTPs ip=192.6.[2-55].[2-55]
=>
E-DOC-CTC-20051017-0155 v1.0
Advertisement
Table of Contents
