THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual page 209

Starting the SLA
Traceroute
E-DOC-CTC-20051017-0155 v1.0
Parameter
maxfail
bypassrt
dffield
dsfield
Use the following command to modify the SLA traceroute parameters:
=>:sla traceroute modify
test = route
[addr] = 11.0.0.138
[size] = 0
[timeout] = 3
[probePerHop] = 3
[port] = 33434
[maxTtl] = 30
[initTtl] = 1
[createHopEntries] = disabled
[frequency] = 0
[maxrow] = 50
[storagetype] = nonVolatile
[trap] =
[type] = UdpEcho
[descr] =
[srcaddr] = 0.0.0.0
[intf] = none
[maxfail] = 5
[bypassrt] = disabled
[dffield] = disabled
[dsfield] = 0
:sla traceroute modify test=route
=>
The SLA traceroute process has been configured now. You now need to start the
process, to do so, use the following command:
=>:sla traceroute start test=route
=>
Description
The max number of
consecutive timeouts allowed
before terminating a
traceroute request
Enables bypassing of the
normal routing tables.
Enables setting of the don't
fragment flag in the IP headers
of the traceroute requests.
The value to store in the
Differentiated Service Field in
the IP packet.
Chapter 12
SLA Monitoring.
Values
number{0-255}
disabled or enabled
disabled or enabled
number{0-255
199